Snowboard Differences

Snowboard can have differences, these differences are mainly in the length, width, Sidecut, Flex, tail and Camber. This difference is adjusting to the needs of its users. These are adjustments that can be done:

    Length - Boards for children as short as 90 centimeters (35 inches); boards for racers, or "alpine" riders, who for 215 cm (85 in). Most people ride boards in the 140-165 cm (55-65 in) range. It is a myth that a high rider only determine the length of the snowboard. In contrast, the length of snowboard suitable mainly for style, weight, and rider preferences. A good rule of thumb is to stay within the recommended weight range of manufacturers. The longer the board, the more stable it is with great speed, but also a bit more difficult to maneuver. Another factor riders consider when selecting a snowboard is the type of riding it will be used for, freestyle boards that are shorter than all-mountain board.

    Width - the width of the waist is usually measured on board, because the nose and tail width varies with the sidecut and taper. Freestyle boards are up to 28 centimeters (11 in) wide, to help balance. Alpine boards are usually 18-21 cm (7.1 to 8.3 inches) wide, although they can be as narrow as 15 centimeters (5.9 in). Most people ride boards in the 24-25 cm (9.4 to 9.8 inch) range. Riders with larger feet (U.S. size 10 +) may have problems with narrower boards, as the rider toes and / or heels may extend over the edge of the board, and impairs the ability of board to make the bend after the pain, or 'fixed on the snow. ' This is called the foot / heel-drag, and can be cured by choosing a wider board (26 cm (10 in) or more), adjusting the stance angle, or a combination of both.

    Sidecut - The edges of the boards are symmetrically curved concavely, so that the tip and tail width greater than the center. These curves help to reverse the board and affect handling. This curve has a radius which may be short as 5 meters (16 feet) on board a child or equal to 17 meters (56 feet) on the driver board. Most boards use a sidecut radius between 8-9 meters (26-30 feet). Shorter sidecut radii (tighter turns) are generally used for halfpipe ride while longer sidecut radii (wider turns) are used for freeride / alpine / racing ride. One new development in sidecuts is the introduction of Magne-Traction by Mervin, which produces: Lib Tech, GNU, and Roxy Snowboards. Magne-Traction incorporates seven bumps on each side of the board who LibTech speculates will improve edge holding.

    Flex - The flexibility of a snowboard affects its handling and typically varies with rider weight. Normally flexibility makes it hard playing harder while soft flex makes the board less stable at high speeds. There is no standard way to quantify snowboard stiffness, but novices and dormitories which mostly do rails tend to prefer soft flexible, rigid flexible riders, and all those things in between.

    Tail / nose width - Many freestyle boards have equal nose / tail specs for equal performance either direction. Freeride and alpine boards, however, has a directional shape with a wider nose and longer. Board is designed for powder conditions exaggerate the differences even more for more flotation in powder.

    * Camber - The curvature of the basic effects handling and carving snowboard. Typical modern snowboards have curves upward a few degrees along the effective edge. Experiments have led to a board with rocker, or curve upward, which makes for more butter and the board can increase the float in powder.

You can fine more information about Snowboard Differences here: